Why the coating of stainless steel security mesh is easily peel off?

The coating of the stainless steel security mesh provided by some suppliers is easily to get off. The reasons are:

1) The powder quality is not good. Uneven particle sizes will cause the powder not be melted sufficiently, so its adsorption force will naturally become smaller.

2)The temperature is not enough, the drying oven temperature must reach to more than 200 degrees before the mesh goes into the spray chamber, thus to make sure the powder could be melted sufficiently and fix on the stainless steel security mesh.

3) The mesh surface did not thoroughly cleaned. Dust, oil or other dirty particles will make the powder attachment lower, thus affect the powder adsorption.

4) the net surface itself is curved, so sticky not very well.

MAISHI offer stainless steel security mesh with the world top brand powder -- Akzo Nobel powder, which could keep the original bright and shiny color for years without fading, peeling or bursting.

Akzo Nobel powder coating is a kind of dry powder. It is sprayed to stainless steel security mesh surface by electrostatic spraying. Then baked in a woven at a temperature of about 200 degree. The advantages of the powder coating are non-toxic, non-polluting, non-waste, and is environmental friendly.

Any need, welcome to contact MAISHI MFG GROUP.