Security Screen 316 Black Powder Coat Stainless Steel Wire Mesh

Stainless steel security screen is a kind of woven stainless steel mesh, powder coated with black color. Weaving by high tensile wire which is over 900N to prevent burglars and thieves from entering into people's house illegally.

1. The most important thing --- SAFETY!

So it needs the security screen to be strong enough to prevent any delibrate damage.

1. High tensile wire over 900N

2. Thicker wire to support the strongness.

3. Anti Knife Shear

Luckily MAISHI security mesh meet all these characters, and our 0.9mm is thicker than the market 0.8mm. And now 0.9mm is more and more welcomed by the market.

Also our mesh has passed the Anti Knife Shear test to ensure the real safety of your house.

2. How to ensure QUALITY?

MAISHI care each details as you do.

The correct hole size, wire thickness, sheet size and many more:

- Sheets must be flat (no any wave on the surface)

- No obvious tiger lines on the surface

- No color difference on the surface

- No sundries on the surface

- No folded wires on edges

- Tolerance of diagonal length is within +/-5mm

- Edge cutted along one wire

Every detail from PRODUCTION to PACKING

>> MAISHI control the quality from the origin. When the mesh wire arrive at our factory, we will check its chemical component, make sure the wire thickness is correct and even.

>> After the mesh is woven, we check the mesh surface, test the wire thickness and mesh hole size to make sure it is correct.

>> We clean the mesh thouroughly to make sure there is no dust, or dirty on the mesh surface, thus to make sure the powder is well attached to the mesh and no dirties attached under the powder.

>> Before packing, we check the mesh pieces one by one to make sure:

- Sheets are flat (no any wave on the surface)

- No obvious tiger lines on the surface

- No color difference on the surface

- No sundries on the surface

- No folded wires on edges

- Tolerance of diagonal length is within +/-5mm

- Edge cutted along one wire

>> Then we carefully lift the mesh and separate each piece of the security mesh screen with waterproof paper. Thus to make sure the meshes will not be scratched by each other, and keep the mesh surface is smooth and beautiful.

>> After all is finished, we use the poly-wood case, which is not wooden, thus to make sure there is no potentional worm egg inside of the wood to harm the local environment. And we pack the case with steel belt, not nails. Thus to make sure the mesh will not be damaged by nails during transportation.