What should you pay attention to when cutting a marine security mesh?

The marine security mesh is made of 304 stainless steel wire and the surface protection adopts electrostatic spraying. The 304 stainless steel mesh has high anti-rust and anti-damage ability. After inspection, the anti-invasion can reach 2.148 tons, which is stronger against shear and damage. SS is the abbreviation of "stainless steel".

Matters to be aware of when using high-pressure water ejectors to cut and weld marine-grade security meshs.

1 After the end of one incision operation, and the high-pressure water ejection is turned off and on, the operator should check and acknowledge the following items so that the next incision can be carried out smoothly.

2 In order to prevent the high-pressure water recoil and water jet from scattering when the cutting torch is set incorrectly or punched, the operator should be properly covered, so that the high-pressure water jet is separated from the operator.

3 For the water mist formed by the jet of water, if the plant is not equipped with the general ventilation and exhaust equipment, at least the stomach ventilation and exhaust equipment should be equipped in the incision area.

4 In order to prevent the backlash of the high-pressure water jet during the cutting process, the structure of the cutting work table should be properly planned, and the nozzle device can be installed at the head together.

5 When manually transferring the cut material to the cutting work table or moving the parts after cutting, in order to prevent the high-pressure water from spewing out the injured workers, the residual pressure of the high-pressure water must be released beforehand.

6 The high-pressure water jet will cause great damage to the operator. Therefore, the replacement of the nozzle by the diamond mesh must be carried out after the residual pressure of the high-pressure water is released.

The cutting point of the marine security mesh is the above. If you don't understand anything, please feel free to ask our professionals. The quality marine security meshs are carefully cut and processed by experienced technicians. Regular manufacturers are paying attention to these.

More popular reading articles