How to distinguish the quality of the powder coating for security screen？

Powder coating is one of the most important factor that decides the quality of the security mesh screen. Then how to distinguish it?

1. Baking identification

There is not a lot of smoke produced by good powder during the baking process, while poor powder have a lot of smoke during the baking process.

2. Identify by appearance or luster after baking

Good appearance of fine powder products, full, transparent, three-dimensional sense of strong. Poor appearance of the product powder dim, dull, misty surface, non-transparent, three-dimensional sense of difference between the two panels to observe the appearance of poor, Reputation, affect the appearance of the product. Glossy good powder gloss, can be a long time to maintain the relative luster. Poor powder gloss just baked out when the effect is good, a few months to start vector light. Of the material to make the powder can not maintain long-term stability of the gloss, the emergence of light, powder, stripping and so on.

3. Adhesion and Aging Identification

Good powder adhesion, toughness, can keep a few years without powder, aging. Poor adhesion of the poor powder, very brittle, sprayed 3 months to six months after the start of aging, powder.Compared to the test adhesion And bending, and observe a few months after the product with or without aging, chalking. Adhesion and poor aging, the product easy to aging, chalking, rust, shorten product life.

MAISHI has been in security screen manufacturing for many years, and top quality powder coating is assured. Any need, welcome to contact MAISHI MFG. GROUP