How to do the problem of installing a stainless steel security window screen mesh gauze

The installation of stainless steel security window screen meshs is a good choice for high-end office buildings as well as residential or villa windows and doors. Can increase the air circulation rate very well. However, it is inevitable that the phenomenon of stagnation will occur during the installation process. Maishi experts propose the following solutions for you.

After using for a long time, there will be a phenomenon of Kark. For this phenomenon, we will use the stainless steel security window screen mesh as an example to introduce three methods to solve the KarK phenomenon of stainless steel security window screen mesh:

1. stainless steel security window screen mesh window yarns are used for a long time. There is dust inside the slides, which causes the friction to be too large, so the rebound can't go up, you can pull them several times, or wipe them with a rag.

2, may be the spring pre-loading is not enough, you can pull the window screen to the bottom, and then let go, so that the pre-loading force on the window screen can bounce back.

3. The diameter of the spring wire inside the rebounding device is too small, and the rebounding force is not enough. You can find the window screening installation company to change the spring device.

The stainless steel security window screen mesh gauze hides the stainless steel mesh in the window frame, and the aluminum strip is sealed and beautiful. Really reflects the anti-theft, insect proof, ventilation and ventilation, trinity. Moreover, the emergency escape is convenient, unobstructed and unobstructed. Easy to clean, as long as a rag can be cleaned very cleanly. Long service life, can be more than 15 years.

More popular articles